Characteristics of peanut mechanical stirring device

Food machinery products belong to the category of general equipment, most of which can enter the industry without the approval of production license. The threshold is relatively low. In addition to the continuous introduction of new products by mature enterprises.

When mixing, the existing food mixing device usually extends the mixing shaft into the crushing cylinder for mixing operation. The liquid in the crushing cylinder will rotate with the mixing shaft and sometimes cause liquid splashing. Therefore, some food mixing devices will install a protective cover on the mixing shaft, but the protective cover can only cover the specific crushing cylinder, which limits the use scope of the food mixing device Around.

The new peanut crushing mixing device of peanut machinery is characterized in that it includes a mixing tank and a stirring shaft. The top of the mixing tank is detachable and is provided with an upper end cover. The mixing shaft penetrates through the upper end cover and extends into the mixing tank. The gap between the mixing shaft and the bottom of the mixing tank is 5mm. A shaft seal is arranged between the upper end cover and the mixing shaft, and six horizontal agitators in the shape of four prism are arranged through the mixing shaft The length of the parts of each mixing bar on both sides of the mixing shaft is equal, and the two adjacent mixing bars are perpendicular to each other.

This structure tends to be simple and automatic, and the process is very simple. The circulating return pipe is made of soft polymer material. When the infrared testing device detects that peanut chips are blocked in the hose, the signal comparison circuit turns on the electromagnetic relay, thus controlling the driving circuit to drive the dredging actuator to dredge the blocked part of the hose.