Peanut machinery is an important part of agricultural modernization.

Peanut machinery is an important part of agricultural modernization and an important guarantee for the sustained and rapid development of agriculture and rural The level of shell mechanization is relatively high, but it is mostly used in economically developed areas and demonstration and promotion areas, and there are more small machines, fewer large machines, more low-end machines, and fewer high-performance machines. In some areas, peanut kernels used for seeds and special purposes still use traditional manual peeling, which results in low labor productivity and uneven regional development.

    In the peanut planting season, all farmers hope to plant peanuts early. If you want to produce peanuts in a fast and efficient way, you must first understand the key points of peanut machinery production technology.

First of all, peanut mechanical soil preparation: use subsoiler and deep tillage plow for soil preparation. When the depth is greater than 25 cm, it can be turned up and loosened, and the soil performance is good. Use a full range subsoiler for subsoiling, especially before sowing. , Can achieve the purpose of improving soil and preventing water evaporation. Deep plowing is carried out in late autumn and early autumn, which can promote the maturation of the soil, maintain the bottom of the water, and accumulate rain and snow.

Then, sowing: According to the characteristics of peanuts, conditions and redistribution point system to determine, generally in 5 cm of the ground, the temperature is between 15 and 18 degrees, the mulch cover word can be matched about ten days in advance, and then according to the locality The law of temperature change determines the best time for sowing. When the soil moisture is high or the low temperature is relatively low, it can be shallow and thin, but not less than three centimeters; otherwise, it can be deep seeded, but not more than six centimeters. For sandy soil, it should be suppressed in time after seeding.