+8613708996091casy2009@126.com
Knowledge
Home > Knowledge > Content

Analyze the precautions for using the peanut baking machine.

The peanut machine utilizes the avant-garde oil-water integration skill to deal well with the shortcomings of the conventional fryer, and the ability to actively filter the quality of the fried product that can adhere to the oil can always be the same as the quality of the fried product. It not only improves the product quality, prolongs the shelf life, but also brings high added value to the product. In addition, the use of avant-garde mechanical equipment and control, can always adhere to the status of outstanding work, greatly improved the sales of the work together can also make the product quality stable, color, fragrance, taste consistent. Peanut machinery also has the ability to actively filter and extend the service life of mechanical oil extraction, saving frequent oil change times and fuel consumption. The oil consumed in the process of product frying is equivalent to product absorption. The oil.

Peanut baking machine is mainly used for baking or drying peanuts, peanuts, chestnuts, walnuts, almonds, broad beans, coffee beans, melon seeds and other granular materials. The principle of rotary drum, heat conduction and heat radiation is used, and coal is used as fuel; low cost. What makes the use of peanut baking machines more and more common, so what should you pay attention to when using peanut baking machines? The following small series take everyone to understand the precautions for the use of peanut baking machine.

1. Before the fire is fired, the residual slag at the bottom of the furnace should be cleaned. This is to avoid the blockage of the furnace and affect the heating time of the heater. In the process of burning, the grate should be cleaned in time to avoid poor ventilation caused by coal coking.

2. Immediately after firing, open the high temperature pump to accelerate the thermal conduction heat cycle. When the oven temperature reaches 80 °C, start the forward rotation button of the cage to make the cage enter the working state and avoid the high temperature static deformation. During the operation, when operating the forward/reverse button, the cage should be stopped first, then the reverse button should be activated to avoid inertia damage to the motor and other components.