The peanut machinery is widely praised for its strong practicability.

Peanut machinery is very common in daily production and processing. What details should we pay attention to during use?

1. Check the oil level display tube on the expansion tank before starting a fire, and ensure that the oil level is about 20 mm higher than the bottom of the glass tube. If the oil level is not up to the level, add 330# heat transfer oil in time.

2. Turn on the high-temperature pump immediately after the fire is started to accelerate the circulation of the heat transfer oil. When the oven temperature reaches 80℃, activate the rotating cage forward button to make the rotating cage enter the working state to prevent the high temperature from being deformed.

3. The oil temperature of this oven should be controlled at 290℃-300℃. The temperature is controlled by opening and closing the fuel door. When the oil temperature is higher than 300℃, open the fuel door to cool down. When the oil temperature is lower than 290℃, close the fuel door. The temperature of the oil should not exceed 300℃ to prevent the heat transfer oil from reaching the boiling point.

4. The closed tightness of the peanut oven box can be adjusted, and the integrally formed silicone rubber door seal ring ensures high vacuum in the box. The oven should burn high-quality coal. During the burning process, the stove bar should be cleaned in time to prevent coal coking. Poor ventilation.

5. During the working process, when operating the forward and reverse buttons, stop the cage first and then start the reverse button to prevent damage to the motor and other components due to inertia.

Attention to these six small details, not only can extend the service life of the peanut machine, but also improve our work efficiency, so this cannot be ignored.