banner
Home » Knowledge » Content
Product Categories

What should you pay attention to when using peanut peeler?

- Dec 25, 2018 -

Literally, the peanut peeling machine is to remove the peanut shell, leaving only the granules. It has a good peeling structure, can completely protect the peanuts, and only peels the skin without damaging the granules, greatly reducing the manual production of the working people. Increased production efficiency. What should I pay attention to when using a peanut peeler?

1. First check whether the fasteners are tightened, whether the rotating part is flexible, whether there is lubricating oil in each bearing, and whether the peeling machine is placed smoothly. In order to ensure the operator, the outer casing of the motor must be grounded.

2, before the application of power, the peanut red peeling machine will turn a few turns. If there is a crash, you need to find out the cause and then power on. Appropriate screens should be selected according to the size of the peanut kernels.

3, the requirements for the degree of dry and wet peanuts: peanuts should not be too dry or too wet, too dry, high breakage rate of peanuts. It is too wet and the speed of shelling will be slower. In the winter, the peanuts stored in the countryside are generally dry. To make it suitable for dry and wet, it can be sprayed evenly on 100 kg of peanuts with about 15 kg of warm water, covered with plastic film for about 10 hours, and then air-dried for about 1 hour in the sun. Start to shell. It takes only about 6 hours to cover with plastic film in other seasons, and the rest of the operation is the same. The solution to the increase in peanut shells is to move the motor down to tension the fan belt and increase the amount of air blown.

4. After power-on, try the test first and pay attention to whether the rotor is turning correctly. After the motor is started, the steering of the rotor should be consistent with the direction indicated on the implement. First idling for a few minutes, observe whether there is abnormal noise, and the operation is normal and stable before the peanuts can be quantitatively, uniformly and continuously put into the hopper.

With the development of agriculture, the productivity of farmers is getting bigger and bigger, the output of crops is getting bigger and bigger, and many manufacturers are collecting more and more. As a kind of crops, peanuts have a very high production volume. . Therefore, it is possible to make peanut peeling applications more and more extensive.