Share peanut machinery to stabilize the market with familiar technology.

Peanut machinery is very common in daily production and processing. What details should we pay attention to in the process of using?

1. Before fire, check the oil level display pipe on the expansion tank, and ensure that the oil level is about 20 mm higher than the bottom of glass pipe. If the oil level is not up to the standard, 330 ° heat transfer oil shall be added in time.

2. After the fire is started, open the high-temperature pump to accelerate the circulation of heat conduction oil. When the oven temperature reaches 80 ℃, start the positive turning button of the cage to make the cage enter the working state to prevent the deformation of the high temperature.

3. The oil temperature of the oven shall be controlled at 290 ℃ -300 ℃, and the temperature shall be controlled by switching the fuel door. When the oil temperature is higher than 300 ℃, open the fuel valve to cool down. When the oil temperature is lower than 290 ℃, turn off the fuel valve to raise temperature, and the oil temperature shall not exceed 300 ℃, so as to prevent the heat transfer oil from reaching the boiling point.

4. The box of peanut oven is closed and tight, and can be adjusted. The integrated silicone rubber door sealing ring ensures that the oven with high vacuum degree should burn high-quality coal blocks. In the process of burning, the furnace bar should be cleaned timely to prevent the coal coking from causing poor ventilation.

5. During the operation, the rotating cage shall be stopped and then the reverse button shall be started before the positive and negative button is operated to prevent the inertia action from damaging the motor and other parts.